OEKATECH NEWS

23.05.2018
Data Protection

As of 25 /May 2018, the new European data protection law will come into effect. Basic changes in the responsible handling of personal data will be valid. We consider this a very serious issue and ask you to contact us, if you have any questions or doubt.

19.04.2018
Assembled component groups

Since April 2017, we started our assembly line for electronic door systems. Within our new installed assembly line, we mark our high precision deep drawn parts with laser. Afterwards we assemble our parts with various components. We already delivered more than 300.000 parts to our customers.

read
19.04.2018
Enhancement of executive board

Since 1st April 2018 Mr. Stefan Pickel is completing our management board at OEKA TECH, together with Mr. Michael Nier, who is in charge since Munich Investment company RCP stepped in. Both are holding the executive position of management board. They put in practice concrete plans to push our successful company further by a modern orientation, innovation and investment.

read
19.04.2018
Battery Show Europe 2018

OEKA TECH is taking part at the International trade fair The Battery Show Europe 2018.
„The Battery Show Europe provides an opportunity to source the latest manufacturing solutions from across the battery supply chain for industries including automotive, utilities, renewable energy, grid, power tools, and electronics”

read
20.03.2018
Our Parts in Action

With our deep drawn parts from OEKATECH we are moving people and goods worldwide:

The field of application of our high precision parts are trucks and cars: clutches, gearings, or in the wide range of sensors you can find our sleeves, rings and housing. 

read
20.03.2018
Restyling

Our OEKATECH team has grown on a steady basis over the last years. Together with our architect, we finalized our new office concept – the construction works are about to start very soon. Modernized offices for our administration and enlarged social rooms for all team members are a visible transformation of our success and the ongoing progress of OEKATECH.

read
20.03.2018
Assembly of Deep Drawn Parts

OEKATECH has longtime experience in assembling of deep drawn parts. We invested in this field in 2017 and extended our production capacity on our assembly line.

read
20.02.2018
Where do you find our parts?

You will find our high precision deep drawn parts from OEKATECH in the main functional area of cars and trucks. Get the information in our next Newsletter and find out about more exciting ways to use our parts. 

20.02.2018
International Women′s Day at OEKATECH

An even gender balance as well as the internationality of its employees are important indicators that demonstrate that OEKATECH is a modern, forward-looking partner for its global customers. With our high level of excellent and motivated women in administration and production we are over the metal sector average. Modern work time models at OEKATECH make it easier to unite family and work.

read
20.02.2018
Prototypes at OEKATECH

Before the SOP of new products, the need of prototypes are getting more and more important. With close-to-production prototypes, which are available at short notice, Designers and Application Engineers are able to check important characteristics and to optimize the installation situation. The main criteria for this are time and precision.

 With our extended services and our know-how, we are able to respond even to short-notice customer wishes. Our prototype-service is especially addressing to the teams of designer and development.

read
17.01.2018
Prototypes

Are you already using our Prototypes-Services? As your excellent partner for high precision deep drawn parts, just contact us for our Prototypes!

17.01.2018
New members in the OEKATECH Team

The excellent perspectives for the coming business years, as well as our continuous growth during the past two years are leading to a significant enlargement of our team. Both in the production and in administration we could welcome new colleagues at the beginning of the New Year.

read
17.01.2018
Tooling shop is 100% OEKATECH

Just in time to the beginning of the New Year 2018, we completely integrated our tool shop in the OEKATECH buildings and organization. 

Both the construction of new tools and the maintenance of existing tools are now 100% in the buildings of OEKATECH.

 

read
20.12.2017
Blechexpo 2017

We presented our company beginning of November at the 13. Blechexpo 2017 in Stuttgart. We found highly qualified experts visiting the fair and our booth. We were able to speak 4 days with designers, decision makers and visitors and talk about our news. 

read
20.12.2017
2017 Review

The year 2017 is ending. Looking back, we started new projects and made some major changes. Our plans for 2018 are inspiring for our team and we´re looking forward on our stable growth. We would like to take this opportunity to thank you for the trust you have placed in the us and for the valuable cooperation with you. 

read
20.12.2017
Our production scope

Deep drawn metall parts have many advantages – one of the major advantage is the wide scope of application. Using thin milled stainless steel with 200µm or up to 0,4mm thick aluminum coils – in the end we are producing high precision components. 

read
21.09.2017
Electric Vehicles and Hybrid Cars – OEKA TECH is ready to participate

The enormous growth of the Electric Vehicles market is generating a rising demand for deep-drawn parts in various applications. Especially assembly groups for electric power units or battery systems are requiring deep drawn parts. With our experiences in producing battery components, OEKA TECH is an appropriate partner for you.

With our good contacts in the e-mobility sector and experience in design of deep-drawn parts, we are prepared to support your project!

Great challenges in future – use our experience!

21.09.2017
Sheet metal forming – a way to replace metal-cut parts

Deep drawn parts offer several possibilities in various applications to replace metal-cut parts.

read
21.09.2017
Curious about our booth at the Blechexpo?

You can meet us during the 13. International Trade Fair for sheet metal working Blechexpo
from 07.11. till 10.11.2017 at booth 9500-1 in hall 9.

Visit us at our booth and find out what kind of sweet surprise we are preparing for you.

21.09.2017
Welcome to OEKA TECH!

On 1st September two new trainees started their career at OEKA TECH Automotive GmbH with an apprenticeship as tool mechanics specialized in pressing and metal forming technique.

With all our best wishes for a successful future at OEKA TECH, we are welcoming our new team members!



 

24.08.2017
We succeeded in renewing our certificates!

All our processes and offered services have been revised according to the guidelines of DIN EN ISO 9001:2008 and TS 16949:2009 and have been successfully accredited by DEKRA. OEKA TECH continues delivering high quality products and services.

Due to our intense quality awareness, we are complying with the quality standards of our customers. Our quality management is surveying our processes permanently and systematically. The successful passing of the re-audit approves the high level of quality consciousness and performance of the OEKA TECH-team. Quality conformity and customer satisfaction are first priority at OEKA TECH!

As of now, our current certificates will be available – please feel free to contact us!

24.08.2017
OEKATECH at BLECHEXPO 2017

Have you already arranged your meeting with us?
Visit us at the 13. International Trade Fair BLECHEXPO in Stuttgart from Tuesday Nov 7th - Friday Nov 10th 2017!

Hall 9 / Booth 9500-1


Mailing Address
OEKA TECH Automotive GmbH
Laubanger 2
96052 Bamberg

Visitors & Suppliers
OEKA TECH Automotive GmbH
Laubanger 2
96052 Bamberg


TOP